HP Guardian Errors Manual page 68

Cause The size of an output buffer was too small to hold the data. Error 563 is an operating system
error and should not be confused with error 177, which is a data communications error.
Effect The operation failed.
Recovery Increase the size of the buffer.
564
Cause The operation specified is not permitted on this file type.
Effect The operation failed. Error 564 is returned rather than error 2 when an unqualified failure
occurs.
Recovery Determine why an invalid operation was requested and correct the request.
565
Cause The server that received the message found the request malformed or not appropriate under
current conditions.
Effect The operation failed.
Recovery The problem is probably on the requester side. Verify the conditions of the requester; if
they are satisfied, contact your service provider.
566
Cause The requester found the reply from the server was malformed or not appropriate under
current conditions. The error is returned to the requester, not to the reply procedure, because the
problem is detected in the requester's reply handling (such as AWAITIO[X]).
Effect The operation failed.
Recovery The problem is probably on the server side. Verify the conditions of the server; if they
are satisfied, contact your service provider.
567
Cause A CLASS of DEFINE is being used in a context where it is not supported by the operating
system level.
Effect The operation failed.
Recovery Increase the operating system level of the target system or use a supported CLASS of
DEFINE.
573
Cause A process control operation was attempted using a process handle of a system process
(IOP).
Effect The operation failed.
Recovery Only attempt the operation on user processes.
578
68 File-System Errors
(%1064) The operation is not supported for this file
type.
(%1065) A malformed request was denied.
(%1066) This reply is malformed or not appropriate.
(%1067) The define used is incompatible for use with
target system's TOS version.
(%1075) The requested process handle cannot be returned.
(%1102) The block size specified is too large.