HP Guardian Errors Manual page 61

Cause A controller or channel failure occurred (path error).
Effect The file operation stopped at some indeterminate point.
Recovery Corrective action is device dependent and application dependent.
215 (%327)
Cause A hardware failure occurred (path error).
Effect The file operation stopped at some indeterminate point.
Recovery Corrective action is device dependent and application dependent.
216 (%330)
Cause A memory-access breakpoint was encountered during this operation.
Effect The file operation stopped at some indeterminate point.
Recovery If the breakpoint was not intentionally set, clear it using Debug. Note which system call
was used in the application and/or which system process is affected. If the problem persists, contact
your service provider.
217 (%331)
Cause A hardware failure occurred (path error).
Effect The file operation stopped at some indeterminate point.
Recovery Corrective action is device dependent and application dependent.
218 (%332)
Cause A controller failure, channel failure, line disconnect between controller and modem, or loss
of modem clock occurred (path error).
Effect The file operation stopped at some indeterminate point.
Recovery Corrective action is device dependent and application dependent.
219 (%333)
Cause An invalid device reconnect occurred (path error).
Effect The file operation stopped at some indeterminate point.
Recovery Corrective action is device dependent and application dependent.
220 (%334)
I/O attempted to absent memory
page (hardware path error).
(device type: any except 2)
Memory breakpoint encountered during
this I/O operation. (device type: any except 2)
Memory parity error during this
I/O (hardware path error).
(device type: any except 2)
Interrupt timeout occurred on a channel,
or a controller, modem, or the line between,
or lost the modem clock (path error).
(device type: any except 2)
Illegal device reconnect (path error).
(device type: any except 2)
Protect violation; an I/O controller
attempted an illegal write.
(device type: any except 2)
Error Code Descriptions 61