HP Guardian Errors Manual page 143

Table 6 NEWPROCESS Error 6 Error Subcodes (continued)
Decimal Octal Meaning
7 %007 The library file does not have the correct file structure.
8 %010 The program file requires a later version of the operating system.
9 %01 1 The library file requires a later version of the operating system.
10 %012 The program file does not have a main procedure.
13 %015 The library file has a main procedure.
14 %016 Program file has a stack definition of zero pages.
16 %020 The program file has an invalid procedure entry-point (PEP) table.
17 %021 The library file has an invalid procedure entry-point (PEP) table.
18 %022 The initial extended segment information in the program file is inconsistent.
20 %024 The program file resident size is greater than the code area length.
21 %025 The library file resident size is greater than the code area length.
22 %026 The program file was not prepared by the nld utility or the Binder program.
23 %027 The library file was not prepared by the nld utility or the Binder program.
24 %030 The program file has undefined data blocks.
25 %031 The library file has undefined data blocks.
26 %032 The program file has data blocks with unresolved references.
27 %033 The library file has data blocks with unresolved references.
28 %034 The program file has too many (more than 32) TNS code segments.
29 %035 The library file has too many (more than 32) TNS code segments.
30 %036 TNS/R code length in the program file is invalid.
31 %037 TNS/R code length in the library file is invalid.
32 %040 TNS/R code address in the program file is invalid.
33 %041 TNS/R code address in the library file is invalid.
34 %042 TNS/R data length in the program file is invalid.
35 %043 TNS/R data length in the library file is invalid.
36 %044 TNS/R data address in the program file is invalid.
37 %045 TNS/R data address in the library file is invalid.
38 %046 Program file has too many TNS/R code segments.
39 %047 Library file has too many TNS/R code segments.
40 %050 Program file has invalid TNS/R resident areas.
41 %051 Library file has invalid TNS/R resident areas.
42 %052 Accelerator header in program file is invalid.
43 %053 Accelerator header in library file is invalid.
44 %054 UC (user code) was accelerated with the wrong virtual address.
45 %055 UL (user library) was accelerated with the wrong virtual address.
46 %056 Program file has entry in TNS/R fixup list with invalid external entry-point (XEP) index value
or invalid code address value.
Error Codes 143