HP Guardian Errors Manual page 59

Recovery Check that the correct tape was mounted. If a mismatch of DEFINE attribute values
occurred, modify the DEFINE attribute that did not match the tape label. Use the MEDIACOM
INFO TAPELABEL command (on G-series systems) to dump the beginning of the volume group
labels on the tape. Correct the label accordingly. For additional information, see the appropriate
system operator's guide.
197 (%305)
Cause A more detailed error explanation cannot be given because this system does not support
SQL objects.
If an Enscribe operation (such as PURGE, FUP ALTER, SETMODE, or FUP SECURE) is attempted
on an SQL sensitive file, this error is returned.
Effect The operation fails.
Recovery The operation can only be performed if your system uses the NonStop SQL/MP product.
198 (%306)
Cause The specified DEFINE name does not exist.
Effect The request is ignored.
Recovery Either correct the name or supply a DEFINE of the given name.
199 (%307)
Cause An attempt was made to change a security attribute (security vector, license, PROGID, and
CLEARONPURGE) for a file protected by Safeguard.
Effect No security attributes can be established for the file through the file system or through FUP.
Recovery Use SAFECOM to establish the security attributes.
200 (%310)
Cause The logical ownership of the device was switched to the other processor to which the device
is configured.
Effect The file system automatically retries the operation.
Recovery Informative message only; no corrective action is needed.
201 (%311)
Cause This error can occur for the following reasons:
A request sent to a process or device on a remote system by way of the Expand subsystem
received this error because the Expand process on the remote system could not deliver the
request to the process or device.
There was an incorrectly formatted message-system request.
An SQL error has occurred.
A DEFINE of the given name could not
be found. (device type: any)
The disk file is SAFEGUARD protected.
(device type: 3)
The device is owned by an alternate
port. (device type: any except 2)
The current path to the device is down
(device type: any except 0 and 2), an attempt
was made to write to a non-existent process
(device type: 0), the message-system request was
incorrectly formatted, or an error was found in the
message system interface.
Error Code Descriptions 59