HP Guardian Errors Manual page 137

If the consistency check failed for a TAPE DEFINE, the consistency check number returned indicates
the cause:
Code Meaning
001 Use RETENTION or EXPIRATION, not both.
002 USE IN and USE EXTEND require LABELS ANSI, LABELS IBM, or LABELS IBMBACKUP. In addition, if REELS
is specified, the value must equal the number of volumes listed for VOLUME.
003 VOLUME is required with LABELS ANSI, LABELS IBM, or LABELS IBMBACKUP.
004 The EBCDIC attribute cannot be used with LABELS ANSI.
005 If RECFORM F is specified, BLOCKLEN must be a multiple of RECLEN.
006 Use DEVICE or SYSTEM, but not both.
007 DEVICE is required for LABELS BYPASS or LABELS OMITTED. The BLOCKLEN, EBCDIC, EXPIRATION, FILEID,
FILESECT, FILESEQ, GEN, OWNER, RECFORM, RECLEN, REELS, RETENTION, SYSTEM, USE, VERSION,
and VOLUME attributes cannot be used with LABELS BYPASS or LABELS OMITTED.
008 VOLUME SCRATCH cannot be specified with USE IN or USE EXTEND.
009 FILEID must be specified with LABELS IBM or LABELS IBMBACKUP.
010 RECLEN must be greater than 0 when BLOCKLEN is omitted.
NOTE: The following CLASS DEFINEs do not return error 2058: CATALOG, DEFAULTS, MAP,
SEARCH, and SUBSORT.
If the consistency check failed for a TAPECATALOG DEFINE, the consistency check number returned
indicates the cause.
Code Meaning
001 Use RETENTION or EXPIRATION, but not both.
005 If RECFORM F is specified, BLOCKLEN must be a multiple of RECLEN.
006 Use DEVICE or AVRSYSTEM, but not both.
101 USE cannot be used with LABELS OMITTED.
102 USE is required.
103 FILEID is required.
104 CATALOG OFF is required when LABELS BYPASS or LABELS OMITTED is used.
105 COMMENT, OWNER, RETENTION, TAPEMODE, VERSION NEW, and VOLUME SCRATCH cannot be used
with USE IN.
106 VOLUME is required with USE EXTEND.
107 DEVICE is required when LABELS BYPASS or LABELS OMITTED is used.
108 VOLUME is required when LABELS ANSI, LABELS BACKUP, LABELS IBM, or LABELS IBMBACKUP is used with
USE IN and CATALOG OFF.
109 The character string for OWNER exceeds the maximum length for LABELS IBM or LABELS IBMBACKUP.
1 10 BLOCKLEN, RECFORM, and RECLEN cannot be used with LABELS BACKUP, LABELS BYPASS, or LABELS
OMITTED.
1 12 EBCDIC can be used only with LABELS IBM or LABELS IBMBACKUP.
1 13 AVRSYSTEM, COMMENT, FILECAT, FILEID, GEN, OWNER, POOL, RETENTION, USE, VERSION, and VOLCAT
cannot be used with LABELS BYPASS.
1 14 AVRSYSTEM, OWNER, and VOLUME cannot be used with LABELS OMITTED.
1 15 USE EXTEND cannot be used with LABELS BACKUP or LABELS IBMBACKUP.
1 16 GEN must be an absolute value when CATALOG OFF is used.
Error Codes 137