28: Zfil-Val-Keypositionx - HP Guardian Errors Manual

def ZFIL-DDL-CHECKPOINTCELL
version C00
FOR z-file-sync THROUGH z-file-number
end.
ZFIL-TKN-OLDPRIMARY
Unconditional Tokens
ZSPI-TKN-ERROR is the standard SPI error token, whose value consists of the fields Z-SSID and
Z-ERROR. Z-SSID is the subsystem identifier ZFIL-VAL-SSID. Z-ERROR is the file-system error code
returned in the error parameter of FILEINFO; it is always zero, since CHECKPOINTX does not
return an error code.
ZSPI-TKN-PROC-ERR is the procedure in which the error occurred. Its value is ZFIL-VAL-CHECKPOINTX
(27).
ZFIL-TKN-CHECKPOINTSTATUS indicates the status of the call to CHECKPOINTX. This token returns
a status word in the following form:
Value
<0:7>=0
<0:7>=1
<0:7>=2
Conditional Tokens
ZFIL-TKN-STACKBASE is the checkpoint base-of-stack.
ZFIL-TKN-SREGISTER is the current S register.
ZFIL-MAP-CHECKPOINTCELL is the data to checkpoint. This token can appear from 1 to 13 times.
ZFIL-TKN-OLDPRIMARY is the old primary process ID.
Effect
If an error occurs, the operation fails. If the backup process takes over, the system continues
normally.
Recovery
Check ZFIL-TKN-CHECKPOINTSTATUS for information about CHECKPOINTX.
If the backup process took over, this message is informative only; no corrective action is necessary.

28: ZFIL-VAL-KEYPOSITIONX

A call to the procedure KEYPOSITIONX resulted in an unexpected error.
Unconditional Tokens
ZSPI-TKN-ERRLIST
ZSPI-TKN-ERROR
ZSPI-TKN-PROC-ERR
ZFIL-TKN-XFILENAME
ZSPI-TKN-ENDLIST
token-type ZSPI-TYP-CRTPID.
Meaning
No error
There is no backup or the primary process cannot communicate with the backup; then
<8:15>=file-system error number
Takeover from the primary; then
<8:15>=0 primary stopped
<8:15>=1 primary abnormally ended
<8:15>=2 primary's processor failed
<8:15>=3 primary called CHECKSWITCH
token-type ZSPI-TYP-LIST.
token-type ZSPI-TYP-ERROR.
token-type ZSPI-TYP-ENUM.
token-type ZSPI-TYP-STRING.
token-type ZSPI-TYP-SSCTL.
Error Lists 1 1 1