HP Guardian Errors Manual page 146

Procedure errors and messages manual
Table of Contents

Advertisement

Table 6 NEWPROCESS Error 6 Error Subcodes (continued)
Decimal
Octal
1 12
%160
1 13
%161
1 14
%162
1 15
%163
1 17
%165
121
%171
122
%172
124
%174
Effect No process is created.
Recovery Take corrective action as indicated by the subcode. For example, if subcode 2, 3, 4, or
5 is returned, use the FUP INFO command or the FILEINFO procedure to check the file code.
7
Cause The program file contains procedures having CALLABLE or PRIV attributes, but the program
file is not licensed to execute in privileged mode and the super ID was not running the program.
Effect No process is created.
Recovery Have the super ID license the program.
8
Cause The process name was invalid.
Effect File-system error number %nnn is returned in error.<8:15>. No process is created.
Recovery Refer to
9
Cause The call specified a library file, but the program was either already running with a different
library or was not running with a library and a library was specified.
Effect No process is created.
Recovery All processes running a given program must use the same library. Always specify the
library file name to avoid the conflicts that can arise when the library file is modified.
10
(%005000 + %nnn)
Cause The process could not communicate with the system monitor process, possibly because the
processor module where the program was to be run did not exist or was inoperable. %nnn in
error.<8:15> is the file-system error and indicates why the NEWPROCESS error occurred.
Effect No process is created.
Recovery Select another processor, then try again.
11
146 NEWPROCESS AND NEWPROCESSNOWAIT Errors
Meaning
The program file specifies too many shared run-time libraries (SRLs).
The library file specifies too many shared run-time libraries (SRLs).
The program file specifies duplicate shared run-time libraries (SRLs).
The library file specifies duplicate shared run-time libraries (SRLs).
The shared run-time library (SRL) does not export any procedures.
The shared run-time library (SRL) does not have a file code of 700.
The list of unresolved flags in the program file contains an error.
An attempt was made to spawn a shell script on a remote node.
(%003400)
UNLICENSED PRIVILEGED PROGRAM
(%004000 + %nnn)
"File-System Errors" (page 19)
(%004400)
LIBRARY CONFLICT
(%005400 + %nnn)
PROCESS NAME ERROR
for corrective action for error number %nnn.
UNABLE TO COMMUNICATE WITH SYSTEM MONITOR PROCESS
FILE-SYSTEM ERROR ON LIBRARY FILE

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Guardian

Table of Contents