7: Zfil-Val-Checkswitch - HP Guardian Errors Manual

returned in the error parameter of FILEINFO; it is always zero, since CHECKPOINTMANY does
not return an error code.
ZSPI-TKN-PROC-ERR is the procedure in which the error occurred. Its value is
ZFIL-VAL-CHECKPOINTMANY (6).
ZFIL-TKN-CHECKPOINTSTATUS indicates the status of the call to CHECKPOINTMANY. This token
returns a status word in the following form:
Value
<0:7>=0
<0:7>=1
<0:7>=2
<0:7>=3
Conditional Tokens
ZFIL-TKN-STACKBASE is the checkpoint base-of-stack.
ZFIL-TKN-SREGISTER is the current S register.
ZFIL-MAP-CHECKPOINTLIST is the CHECKPOINT list passed to CHECKPOINTMANY.
ZFIL-TKN-OLDPRIMARY is the old primary process ID.
Effect
The operation fails. If the backup process took over, the system continues normally.
Recovery
If an error occurred, check ZFIL-VAL-CHECKPOINTSTATUS for information about
CHECKPOINTMANY.
If the backup process took over, this is an informative message only; no corrective action is
necessary.

7: ZFIL-VAL-CHECKSWITCH

A call to the procedure CHECKSWITCH returned a nonzero file-system error code. Either an error
was detected or a backup takeover occurred.
Unconditional Tokens
ZSPI-TKN-ERRLIST
ZSPI-TKN-ERROR
ZSPI-TKN-PROC-ERR
ZFIL-TKN-CHECKPOINTSTATUS
ZSPI-TKN-ENDLIST
94 File-System Errors
Meaning
No error
There is no backup or the primary process cannot communicate with the
backup; then <8:15>=file-system error number
Takeover from the primary; then
<8:15>=0
<8:15>=1
<8:15>=2
<8:15>=3
Invalid parameter; then
<8:15>=1
<8:15>=n,
refer to the Guardian Procedure Calls Reference Manual for more information
token-type ZSPI-TYP-LIST.
token-type ZSPI-TYP-ERROR.
token-type ZSPI-TYP-ENUM.
token-type ZSPI-TYP-INT.
token-type ZSPI-TYP-SSCTL.
(primary stopped)
(primary abnormally failed)
(primary's processor failed)
(primary called CHECKSWITCH)
(error in stack-base parameter)
n > 1 (error in word[n-2];