Recovery Retry the call. If this error recurs, contact your service provider.
57
A SHARED RUN-TIME LIBRARY (SRL) HAS UNDEFINED EXTERNALS
Cause A shared run-time library (SRL) has undefined externals; the error-detail information contains
the SRL number of the SRL that has undefined externals.
Effect No process is created.
Recovery Check that the SRL versions match and obtain matching versions if they don't; otherwise,
contact your service provider.
58
INTERNAL PROCESS CREATION ERROR
Cause An internal error occurred.
Effect No process is created.
Recovery Retry the call. If this error recurs, contact your service provider.
59
INTERNAL PROCESS CREATION ERROR
Cause An internal error occurred.
Effect No process is created.
Recovery Retry the call. If this error recurs, contact your service provider.
60
SECURITY VIOLATION; A SHARED RUN-TIME LIBRARY (SRL)
CONTAINING CALLABLE PROCEDURES MUST BE LICENSED TO BE
USED BY CALLABLE OR PRIVILEGED CODE
Cause A security violation occurred; a shared run-time library (SRL) containing callable procedures
must be licensed to be used by callable or privileged code.
Effect No process is created.
Recovery Rebuild the program file. If the error recurs, contact your service provider.
61
UNABLE TO ALLOCATE MEMORY FROM SYSTEM POOL
Cause Memory for a needed buffer was unavailable in the system pool in the processor.
Effect No process is created.
Recovery Try again or select another processor. If the problem persists, run the PEEK program in
the processor where process creation failed and determine new memory needs.
62
SYMBOLIC REFERENCE TARGET/SOURCE TYPE MISMATCH
Cause An attempt was made to resolve a procedure address to a data area or a data address to
a procedure area.
Effect No process is created, and a message is printed on the home terminal. For example:
PID: \SAT.1,284 \SAT.$DATA.SRLVOL.NULCLIE2 (ELF)
Native UL Symbolic Reference Error: Target/Source Type Mismatch:
Prg: \SAT.$DATA.SRLVOL.NULCLIE2 -> X_INT (DATA)
*ERROR* PROCESS_CREATE_ Error: 62
Error Codes
171
Need help?
Do you have a question about the Guardian Errors and is the answer not in the manual?