HP Guardian Errors Manual page 29

If the problem persists, contact your HP representative. Configuration information for the current
system image should be saved for your HP representative.
33 (%41)
Cause Insufficient buffer space was available for the I/O process. This message is returned for a
privileged operating system call.
Effect The procedure sets the error code and returns without performing the requested operation.
Recovery Wait, then try again; check the system for processes that are using too much memory
for I/O or applications attempting to queue very large I/O operations. For persistent network
errors, provide more buffer space for the network process. If the disk process ran out of lock space,
try to reduce the number of concurrent locks on this disk process.
If the problem persists, contact your HP representative.
34 (%42)
Cause All file-system control blocks are in use. This message is returned for a privileged operating
system call.
Effect The procedure sets the error code and returns without performing the requested operation.
Recovery Wait, then try again. Check the system for processes that use too many open files.
If the problem persists, the system has run out of some resource. Contact your service provider.
35 (%43)
NOTE: The above error description is displayed only on systems running J06.08 and earlier
J-series RVUs and H06.19 and earlier H-series RVUs.
35 (%43)
NOTE: The above error description is displayed only on systems running J06.09 and later J-series
RVUs and H06.20 and later H-series RVUs.
Cause All I/O process control blocks are in use, or a requester tried to acquire too many record
locks or file locks. This message is returned for a privileged operating-system call.
Effect The procedure sets the error code and returns without performing the requested operation.
Recovery Wait, then try again. Check the system for processes that are performing too many
concurrent I/O operations, or rewrite the application to request fewer locks. If the problem persists,
contact your service provider.
36 (%44)
I/O process is unable to obtain
sufficient buffer space. (device
type: any except 2)
Unable to obtain a file-system
control block. (device type: any)
Unable to obtain an I/O process control
block, or the transaction or open lock
unit limit has been reached.
(device type: any except 2)
Unable to obtain a lock control block,
or the transaction or open lock
unit limit has been reached.
(device type: any except 2)
Unable to lock physical memory;not
enough memory available. (device type: any)
Error Code Descriptions 29