6: Zfil-Val-Checkpointmany - HP Guardian Errors Manual

ZFIL-TKN-CHECKPOINTSTATUS indicates the status of the call to CHECKPOINT. This token returns
a status word in the following form:
Value
<0:7>=0
<0:7>=1
<0:7>=2
Conditional Tokens
ZFIL-TKN-STACKBASE is the checkpoint base-of-stack.
ZFIL-TKN-SREGISTER is the current S register.
ZFIL-MAP-CHECKPOINTCELL is the data to checkpoint. This token can appear from 1 to 13 times.
ZFIL-TKN-OLDPRIMARY is the old primary process ID.
Effect
If an error occurred, the operation fails.
If the backup process took over, the system continues normally.
Recovery
Check ZFIL-TKN-CHECKPOINTSTATUS for information about CHECKPOINT.
If the backup process took over, this is an informative message only; no corrective action is
necessary.

6: ZFIL-VAL-CHECKPOINTMANY

A call to the procedure CHECKPOINTMANY returned a nonzero file-system error code. Either an
error was detected or a backup takeover occurred.
Unconditional Tokens
ZSPI-TKN-ERRLIST
ZSPI-TKN-ERROR
ZSPI-TKN-PROC-ERR
ZFIL-TKN-CHECKPOINTSTATUS
ZSPI-TKN-ENDLIST
Conditional Tokens
ZFIL-TKN-STACKBASE
ZFIL-TKN-SREGISTER
ZFIL-MAP-CHECKPOINTLIST
def ZFIL-DDL-CHECKPOINTLIST
version C00
FOR z-cellcount THROUGH z-checkpointcell
end.
ZFIL-TKN-OLDPRIMARY
Unconditional Tokens
ZSPI-TKN-ERROR is the standard SPI error token, whose value consists of the fields Z-SSID and
Z-ERROR. Z-SSID is the subsystem identifier ZFIL-VAL-SSID. Z-ERROR is the file-system error code
Meaning
No error
There is no backup or the primary process cannot communicate with the backup; then
<8:15>=file-system error number
Takeover from the primary; then:
<8:15>=0 (primary stopped)
<8:15>=1 (primary abnormally ended)
<8:15>=2 (primary's processor failed)
<8:15>=3 (primary called CHECKSWTICH)
token-type ZSPI-TYP-LIST.
token-type ZSPI-TYP-ERROR.
token-type ZSPI-TYP-ENUM.
token-type ZSPI-TYP-INT.
token-type ZSPI-TYP-SSCTL.
token-type ZSPI-TYP-UINT.
token-type ZSPI-TYP-UINT.
token-type ZSPI-TYP-CRTPID.
Error Lists 93