SATO MB200i Programming Reference Manual page 99

AUTHENTICATION MODE, CONFIGURATION
FUNCTION
Specifies the parameters related to Bluetooth authentication mode search and connectivity.
FORMAT
<ESC>I7abcde
Place after <ESC>A and before <ESC>Z.
EXAMPLE <ESC>A
<ESC>I700800010008000036
<ESC>Z
OUTPUT
This command does not result in printer output.
NOTES
This command is only valid for printers conforming to Bluetooth specifications.
This command must be preceded by the <ESC>A command and followed by the <ESC>Z command in
a separate string and cannot be used in conjunction with other commands.
This command becomes valid upon restarting of the printer.
The default settings are as follows:
When restarting the printer after command execution, the command contents will be processed for
Bluetooth interface. The printer will go into sleep mode after completing the settings and the printer can
then be powered off. Do not power off the printer until it has gone into sleep mode.
"i" Programming Reference
Unit 5: Optional Command Codes
Authentication mode
a =
0: None (1 digit fixed)
1: Level 2-1
2: Level 2-2
3: Level 3
b = ISI in Hexadecimal (0015 to 1000, 4-digits fixed)
c = ISW in Hexadecimal (0012 to 0997, 4-digits fixed)
d = PSI in Hexadecimal (0015 to 1000, 4-digits fixed)
PSW in Hexadecimal (0012 to 0997, 4-digits fixed)
e =
Authentication Mode: None
ISI: 0800
ISW: 0700
PSI: 0800
PSW: 0100
5-3
PN: 9001158B