SATO MB200i Programming Reference Manual page 27

COMMAND QUICK REFERENCE
INSTRUCTION
2D50
2S
Vbbbb
WC
WDHaaaaVbbbbXccccYddd
d
WE
WF
WG
WH
"i" Programming Reference
Unit 3: Code Quick Reference
Data Matrix (ECC200). Specifies Data Matrix (ECC200) of 2D code.
a = Cell width in dots (01 to 16)
b = Cell height in dots (01 to 16)
c = Quantity of cells per roll (000, fixed)
d = Quantity of cell rows (000, fixed)
m = Quantity of binary data (1 to 3116)
n = Print data
7EH, 00H: when printing 00H
7EH, 7EH: when printing 7EH
Two-Color Printing. Specifies printing in two colors - black and red.
a = 0: Black print
1: Red print
Vertical Position. Specifies a field's vertical location down the length of the label from the
current base reference point. Units of measurement are dots.
Wireless LAN, EAP Authentification Specification. Specifies EAP.
a = 0: Not used
1: EAP-MD5
2: EAP-TLS
4: EAP-PEAP
Copy Image Area (Partial Copy). To copy an image to another location of the label.
aaaa = Horizontal position of the top left corner of image area
bbbb = Vertical position of the top left corner of image area
cccc = Horizontal length of image area
dddd = Vertical length of image area
Wireless LAN Interface, Password Specification. Allows specification of an authorization
password.
a = Up to 32 characters possible.
Wireless LAN Interface, Secret Key Specification. Specifies the secret key.
a = Valid from 0 to 32 characters.
Wireless LAN Interface, Socket Port Number Settings. Specifies the socket port number.
aaaa = Four digit numeral fixed.
Wireless LAN Interface, User Specification. Specifies username authentification.
a = Valid from 1 to 63 characters.
DESCRIPTION
3-11
PN: 9001158B