SATO MB200i Programming Reference Manual page 20

COMMAND QUICK REFERENCE
INSTRUCTION
BU
CSa
Dabbcccn
dn...n
EU
Faaaabcccc ddee
FWaabcccc
"i" Programming Reference
Unit 3: Code Quick Reference
Buzzer Activation. Activate/Deactivate buzzer. This command can be used only on an MB4i
printer.
a = 0: deactivated
1: activated
Print Speed Selection. Specifies a unique print speed in in./sec. through software for a
particular label.
a = Speed Range
Barcode, Human Readable Information (HRI). Specifies the character type of human
readable information of barcode.
a = 3: JAN/EAN13
4: JAN/EAN8
H: UPC-A
b = Narrow bar width (01 to 12 dots)
c = Barcode height (001 to 999 dots)
n = Barcode print data
Barcode, Human Readable Information (HRI). Specifies the character type of human
readable information of barcode. May be used in conjunction with the preceding <ESC>D.
d = Character type specification
XU
XS
XM
XB
XL
OA
OB
HRI data
n = HRI print data
Expanded Print Length. Expands the print length to 9999 dots.
Sequential Numbering. Allows the printing of sequencing fields (text, bar codes) where all
incrementing is done within the printer.
aaaa = Number of times to repeat the same data (0001 to 9999).
b = Plus or minus symbol (+ for increments; - for decrements).
cccc = Value of step for sequence (001 to 9999).
dd = Quantity of digits for sequential numbering (01 to 99).
ee = Quantity of digits free for sequential numbering (01 to 99).
Line. Prints a line. Units of measurement are dots.
aa = Width of line
b = V: Vertical line
H: Horizontal line
cccc = Length of line
DESCRIPTION
3-4
PN: 9001158B