SATO MB200i Programming Reference Manual page 23

COMMAND QUICK REFERENCE
INSTRUCTION
%a
PG
PMa
PR
PS
Qaaaaaa
QS
RD
RF
"i" Programming Reference
Unit 3: Code Quick Reference
Rotate, Fixed Base Reference Point.
a = 0: Sets print to normal direction.
1: Sets print to 90 degrees counter-clockwise.
2: Sets print to 180 degrees rotated (upside down)
3: Sets print to 270 degrees counter-clockwise (90x CW).
EEPROM Setup. Sets the default printer configuration in EEPROM.
Print Mode Selection. Selects desired backfeed operation.
a = 0: No backfeed, continuous operation
1: Tear-Off
Fixed Font Spacing. Returns the printer to fixed character spacing mode.
Proportional Font Spacing. Places the printer in the proportional character spacing mode.
Will not work with U Font.
Print Quantity. Specifies the total number of labels to print.
aaaaaa = Total quantity of labels to print for the job (000001-999999)
System Priority. Priority setting to System / Command. This command is available only on
MB4i series.
a = 0 : Priority assigned to command
1 : Priority assigned to system setting
CG Fonts. Specifies Agfa CGFont (only available on MB4i Series).
a (Font Type)
b (Style)
c (Character width)
d (Character height)
n (Data to print)
Recall and Print of Font & Logo. Calls and prints font and logo downloaded with Label
Gallery's "GalleryMemMaster".
a = Font ID number (01 to 99)
b = Print digit (1 to 9999)
n = Print data
DESCRIPTION
= A (CG Times)
= 00 Fixed pitch
= 004-999 in dots
or P02-P99 in points
= 004-999 in dots
or P02-P99
= Data
3-7
PN: 9001158B