SATO MB200i Programming Reference Manual page 28

COMMAND QUICK REFERENCE
INSTRUCTION
WI
W1
W2
W3
W4
W5
W6
W7
W8
W9
XBa
"i" Programming Reference
Unit 3: Code Quick Reference
Wireless LAN Interface, IP Setup Method. Allows specification of the IP address setup
method.
a = Address settings:
0: Manual setting
1: DHCP
Wireless LAN Interface, IP Address Settings. Permits setup of the IP address.
a = Decimals up to 12 places.
Wireless LAN Interface, Subnet Mask Setup. Permits setup of the subnet mask.
a = Decimals up to 12 places.
Wireless LAN Interface, Default Gateway Specification. Specifies the default gateway.
a = Decimals up to 12 places.
Wireless LAN Interface, SSID Settings. Specifies the settings for SSID.
a = Alphabets along with a hyphen (-), an underscore (_) can be specified up
to 32 characters.
Wireless LAN Interface, Channel Specification. Allows specification of the channel used.
a = 01 to 14 digits, fixed.
Wireless LAN Interface, Mode Specification. Permits the specification of the WLAN mode.
a = 1: Adhoc Mode
2: Infrastructure Mode
Wireless LAN Interface, Security Function Specification. Specifies mode of encoding.
a = 0: Not set
1: WEP encoding used
2: WPA encoding used
Wireless LAN Interface, WEP Key Specification. Specifies the WEP key.
a = A: ASCII
B: HEX
b = WEP key: ASCII (5 or 13 characters), HEX (10 or 26 characters)
Wireless LAN Interface, Authentification Specification. Specifies the authentification
function.
a = 0: WPA-PSK
1: EAP
Font Type. Specifies 48W x 48L dot matrix font (includes descenders).
a = 0: Disables auto-smoothing of font
1: Enables auto-smoothing if expansion is greater than 3.
n = Print data
DESCRIPTION
3-12
PN: 9001158B