SATO MB200i Programming Reference Manual page 98

BLUETOOTH COMMANDS
PIN CODE, SETTING
FUNCTION
Allows the establishment of a password PIN code. This feature only becomes valid if the
Authentification Mode security level is set to 2 or 3.
FORMAT
<ESC>I6a-a
EXAMPLE
<ESC>A
<ESC>I61234567890123456
<ESC>Z
OUTPUT
This command does not result in printer output.
NOTES This command is only valid for printers conforming to Bluetooth specifications.
This command must be preceded by the <ESC>A command and followed by the <ESC>Z command in
a separate string and cannot be used in conjunction with other commands.
The quantity of characters used to identify the device name may vary up to 16 characters. If that
quantity is exceeded, the command will be ignored.
This command becomes valid upon restarting of the printer.
The default setting is as follows: 0000000000000000.
When restarting the printer after command execution, the command contents will be processed for
Bluetooth interface. The printer will go into sleep mode after completing the settings and the printer can
then be powered off. Do not power off the printer until it has gone into sleep mode.
"i" Programming Reference
Unit 5: Optional Command Codes
a = PIN code: ASCII codes other than control codes 20H to 7EH
(up to 16 alphanumeric characters 20H to 7EH).
5-2
PN: 9001158B