SATO MB200i Programming Reference Manual page 120

*1) When printer receives status request command during printing, the status of after printing end is returned.
*2) When in standby for a dispense, status is reflected after printing a label.
STX
Job ID specified by the command <ESC>IDxx will be displayed for the current job being printed. If the ID is
By receiving this command, printing ends and all of the received buffer content is cleared. The content of the status
will send the printer's status after this process ends.
STATUS RETURN
ACK (HEX 06H)
NAK (HEX 15H)
"i" Programming Reference
Unit 6: Bi-Directional Communications
RETURN STATUS/FORMAT
ID NUMBER STATUS
not specified, this will display as two spaces. <ESC>A -------<ESC>Z
Figure 6-1, Return Status/Format Diagram
RETURN STATUS TABLE
Displays that an error has not occured with the printer.
Displays that an error has occured with the printer.
REMAINING PRINT NUMBER
000000 To 999999
CONTENT
6-4
ETX
PN: 9001158B