SATO MB200i Programming Reference Manual page 78

SERIAL INTERFACE, CONFIGURATION
FUNCTION
Allows configuration of the RS232C Serial Interface.
FORMAT
<ESC>I1abcd
Place between <ESC>A and before <ESC>Z.
EXAMPLE <ESC>A
<ESC>I13000
<ESC>Z
OUTPUT
This command does not result in printer output.
NOTES
Use this command with a <ESC>A and <ESC>Z separately. This command cannot be used in
conjunction with other commands.
Settings can be confirmed by performing a test print.
This command becomes valid when the printer is powered on again.
"i" Programming Reference
Unit 4: Standard Command Codes
Baud rate
a =
1: 9600 bps
2: 19200 bps
3: 38400 bps
4: 57600 bps
5: 115200 bps
Parity
b =
0: None
1: Odd
2: Even
c = Flow control
0: Nil
1: Hardware (RTC/CTS)
d = Unused
0: Fixed
4-48
PN: 9001158B