QR CODE
EXAMPLE
Error Correction Level: 7%
Cell Size on One Side: 05
Data Setting Mode: Manual
Concatenation Mode: Normal
Example 2D30:
<ESC>A
<ESC>H0100<ESC>V0100
<ESC>2D30,L,05,0,0
<ESC>DS1,012345
<ESC>Q2
<ESC>Z
Example 2D31:
<ESC>A
<ESC>H0100<ESC>V0100
<ESC>2D31,a,bb,c,d
<ESC>DS3,n-n
<ESC>DNmmmm,n-n
<ESC>DS1,n-n
<ESC>Q1
<ESC>Z
OUTPUT
(4-25)
NOTES
Data portions or commands (DX commands) must be specified after the parameter portions (2D3x). In
the same manner, specify data parts one after another. The total data quantity in this specification must
be less than 7000 bytes and a maximum of 200 data blocks in data part can be consecutively specified.
Refer to Appendix: Reference Tables 17 and 18 for additional information.
"i" Programming Reference
Unit 4: Standard Command Codes
4-37
PN: 9001158B