SATO MB200i Programming Reference Manual page 142

TABLE 9: BARCODE TYPE (<ESC>BD)
A BARCODE
0 NW-7 (Codabar)
1 CODE39
2 Interleaved 2 of 5
3 JAN/EAN13
4 JAN/EAN8
5 Industrial 2 of 5
6 Matrix 2 of 5
H UPC-A
NOTE: The model composition ratio may not be available for some barcode types.
"i" Programming Reference
Unit 7: Appendix
Set print data including the Start/Stop characters.
A, B, C, D, E, N, T, a, b, c, d, e, n, t. When the barcode print data is [123], specify
[A123A].
Barcode character pitch is enabled.
For print data, refer to the NW-7 code table.
Set print data to include the Start/Stop Character [*]. When the barcode print data is
[12345], specify [*12345*].
Barcode character pitch is enabled.
For print data, refer to the CODE39 code table.
Specify the print data in even-numbered digits. If specifying an odd-numbered digit, "0" will
be added to the head of the print data.
For print data, refer to the Interleaved 2 of 5 code table.
The barcode will not have a guard bar and human readable information.
For print data, refer to the JAN/EAN13 code table.
The barcode will not have a guard bar and human readable information.
For print data, refer to the JAN/EAN13 code table.
Not supported. This will be ignored if specified.
Not supported. This will be ignored if specified.
The barcode will not have a guard bar and human readable information.
For print data, refer to the UPC-A code table.
7-16
DESCRIPTION RATIO
2:5
2:5
2:5
Fixed
Fixed
---
---
Fixed
PN: 9001158B