SATO MB200i Programming Reference Manual page 56

BAR CODES
OUPUT
(4-16a)
(4-16b)
NOTES
UPC and EAN bar codes are not affected by the different types of narrow to wide ratios. Instead, the
<ESC>D command adds descender bars to these codes where needed to meet UPC specifications.
The <ESC>BD command puts desender bars and human readable text below the symbol.
The Code 128, UCC 128, and Code 93 bar codes are not affected by the narrow to wide ratios.
The Codabar, Code 39, and Industrial 2 of 5 bar codes are affected by the Character Pitch command.
This command must be placed before the Bar Code command.
Because of their unique characteristics, two-dimensional (2D) symbols are covered separately.
The <ESC>D and <ESC>BD commands are not valid for the MSI, Code 128, Code 93, UPC-E,
Bookland, UCC128 and Postnet symbologies.
Refer to Appendix: Reference Tables 8 and 9 for additional information.
"i" Programming Reference
Unit 4: Standard Command Codes
4-26
PN: 9001158B