SATO MB200i Programming Reference Manual page 36

PAGE BREAK
NOTES AND
This command is valid only for MB4i series in Journal printing mode.
OUTPUT
When the page break position is not specified, the printer will automatically jump to the next print start
position (0/0) from the last line which is printed.
Maximum length of one page is 150 (in dots).
This command will not work in combination with the following commands:
Type
Control
This command enables you to enlarge the vertical print size as large as possible. Make sure to check
the item size so as not to cause buffer overflow in receive buffer before sending the next data.
[Valid range]
Model
MB400i
MB410i
Hexidecimal code:
ESC: <1B>
z0: <7A>
Parameter: (,aaaa)
Valid range and term of command:
When printer is powered OFF: The set parameter is not maintained.
Valid range within items: The set parameter is valid until overridden by a new value.
Valid range between items: The set parameter becomes invalid.
"i" Programming Reference
Unit 4: Standard Command Codes
Print start position
(V:0Dot H:0Dot )
Print start position
(V:0Dot H:0Dot )
Print start position
(V:0Dot H:0Dot )
Command Description
<Q> Quantity
<F> Sequential numbering
<O> Partial edit
<C> Reprint
16
<30>
16 16
Page 1
Page 2
Page N
Valid length of a page
100-1200
100-1800
4-6
FEED
PN: 9001158B