SATO MB200i Programming Reference Manual page 25

COMMAND QUICK REFERENCE
INSTRUCTION
2D20
2D30
"i" Programming Reference
Unit 3: Code Quick Reference
Maxi Code. Specifies Maxi Code of 2D code.
a = Mode
2: Delivery only (numeric only)
3: Delivery only (alphanumeric only)
4: Standard Symbol
6: Reader only
b = Service class in numeric (001 to 999)
c = Country code in numeric (001 to 999)
d = Postal code
Mode 2: Maximum of 9 numeric digits (0 to 999999999)
Mode 3: Maximum of 6 alphanumeric (000000 to 999999)
m = Quantity of print data (1 to 138)
n = Data (00H is not designable)
QR Code (Model 2). Specifies QR code (model 2) of 2D code.
a = Error correction level
L: 7%
M: 15%
Q: 25%
H: 30%
b = Size of one side of cell in dots (01 to 32)
c = Data setting mode
0: Manual setting
1: Automatic setting (print data specification will differ)
d = Concatenation mode
0: Normal mode
1: Concatenation mode
e = Quantity of partitions by concatenation (01 to 16)
f = Sequential number partitioned by concatenation (01 to 16)
g = Concatenation mode Parity data in Hex character (00 to FF)
k = Enter mode
1: Numeric mode
2: Alphanumeric mode
m = Quantity of data (1 to 2953)
n = Print data
DESCRIPTION
3-9
PN: 9001158B