SATO MB200i Programming Reference Manual page 18

COMMAND QUICK REFERENCE
INSTRUCTION
A
A1aaaabbbb
&R
&S,aa,bbbb,cccc
A(space)Z
*a,bbb
@,nn...n
A3H-aaaa-Vbbbb
"i" Programming Reference
Unit 3: Code Quick Reference
Start Code. Begins all print jobs
Media Size. Specifies the label size.
aaaa = Label height in dots (0 to Vmax)
bbbb = Label width in dots (0 to Hmax)
Form Overlay, Recall. Recalls a label image previously stored in expanded memory.
aa = Storage number (00 to 99)
Form Overlay, Store. Stores a label image in Expanded Memory.
aa = Storage number (00 to 99)'
bbbb = Horizontal size of window to be stored (50 to Hmax)
cccc = Vertical size of window to be stored (50 to Vmax)
Form Feed. Feeds a blank tag or label.
Clear Memory Card. Clears data stored on memory card.
a = Memory section to be cleared.
G: SATO graphics file (001 to 999)
F: Stored formats (001 to 999)
R: BMP graphic file (001 to 999)
bbb = Storage location to clear (001 to 999)
Offline/Pause. Signals the printer to go offline after upon job completion.
nn...n = Applicable only on models with an LCD. Message to be displayed
(maximum 32 characters).
Base Reference Point. Establishes a new base reference point position for the current
label. Units of measurement are dots.
- = Optional character.If included, will shift reference point in negative
direction.
aaaa = Horizontal reference point
bbbb = Vertical reference point
DESCRIPTION
3-2
PN: 9001158B