SATO MB200i Programming Reference Manual page 24

COMMAND QUICK REFERENCE
INSTRUCTION
T
2D10
2D12
"i" Programming Reference
Unit 3: Code Quick Reference
External Character. Specifies to download external character.
a [External Character type] = 1:16x16 (Ascii Code Specification) (Single-
digit Specification)
b [Number of Font Registration] = 01-95
(Double-digit Specification)
c [External Character Code]
d [External Character Font Data]= 16x16: 32 Bytes
PDF417. Specifies PDF417 of 2D code.
a = Minimum module width in dots (01 to 09)
b = Minimum module height in dots (01 to 24)
c = Security level (0 to 8)
d = Quantity of data code words per line (01 to 30)
e = Quantity of lines per symbol (03 to 90)
f = Code type
0: Normal/Omissible
1: Truncated
Micro PDF417. Specifies Micro PDF417 of 2D code.
a = Minimum module width in dots (01 to 09)
b = Minimum module height in dots (01 to 24)
c = Quantity of data code words per line (1 to 4)
d = Quantity of lines per symbol (2)
e = Binary mode
0: Normal/Omissible
1: Binary Mode
m = Quantity of data bytes for binary mode (0001 to 0366)
n = Print data
DESCRIPTION
2:24x24
3:22x22
= 21(H) - 7F(H) (Binary Code Specification)
24x24: 72 Bytes
22x22: 66 Bytes
3-8
(Ascii Code Specification)
PN: 9001158B