All Reset - Icom IC-E7 Instruction Manual

11
OTHER FUNCTIONS

■ All reset

The function display may occasionally display erroneous in-
formation (e.g. when first applying power). This may be
caused externally by static electricity or by other factors.
If this problem occurs, turn power OFF. After waiting a few
seconds, turn power ON again. If the problem persists, per-
form the following procedure.
• Partial resetting is also available. See next page for details.
IMPORTANT!:
Resetting the transceiver CLEARS all memory information
and initializes all values in the transceiver, including TV
channel skip setting.
➥ While pushing and holding [FUNC], [V/M] (
), turn the power ON to reset the CPU.
[SQL] ( •
ATT SET
63
S.MW
SET
) and
• .
SKIP S MW
WFMAM - DUP
VOL PRIO P SKIP
LOW
1
SCAN
WFMAM - DUP
S.MW
VOL PRIO
SET LOW
1
*The displayed frequency differs
according to tranceiver version.
POWER ON
AT
T SQL DTCS ATT
MR
9
5
DTCS ATT
T SQL
P SKIP MR
5 9