Icom IC-E7 Instruction Manual page 71

D D DTCS polarity
Sets DTCS polarity from "BOTH N" (TX/RX:
normal), "TN-RR" (TX: normal, RX: reverse),
"TR-RN" (TX: reverse, RX: normal) and
"BOTH R" (TX/RX: reverse).
WFMAM - DUP T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW 9
1 5
TX/RX: Normal polarity
WFMAM - DUP T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW 9
1 5
TX: Reverse, RX: Normal
(default: BOTH N)
WFMAM - DUP T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW 9
1 5
TX: Normal, RX: Reverse
WFMAM - DUP T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW 9
1 5
TX/RX: Reverse polarity
D D Memory bank link function
Sets the memory bank link function ON (de-
fault) and OFF. The link function provides
continuous bank scan, scanning all contents
in the selected banks during bank scan.
• Bank link setting
q While pushing and holding [FUNC], rotate [DIAL] to select
the desired bank to be linked.
• "A-ON" to "y-ON" appears.
• A to H, J, L, N, O to R, T, U and y are available for usage by
group
w Push [CALL] (
•
MODE SCAN
WFMAM - DUP
T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW 1 5 9
Bank A is linked
e Repeat steps q and w to link other banks.
• To cancel the memory bank link function, repeat steps q and
w to select "OFF."
10
SET MODE
) to select "ON" to link the bank.
WFMAM - DUP
T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW 1 5 9
Bank Y is linked
10
58