Erasing/Transferring Bank Contents - Icom IC-E7 Instruction Manual

■ Erasing/transferring bank contents

The bank contents of programmed memory channels can be
cleared or reassigned to another memory bank.
INFORMATION: Even if the memory bank contents are
cleared, the memory channel contents still remain pro-
grammed.
qSelect the desired bank contents to be transferred or
erased from the bank.
➥ Push [V/M] (
• .
SKIP S MW
➥ While pushing and holding [BAND] (
[DIAL] to select the desired memory bank.
➥ Rotate [DIAL] to select the bank channel.
wPush and hold [V/M] (
SKIP
memory write mode.
• 1 short and 1 long beeps sound.
• Displays the original memory channel number automatically and
" " indicator and memory channel number blink.
• Do not hold [V/M] ( • .
SKIP S MW
bank contents will be copied to VFO.
Push
- DUP
WFMAM T SQL DTCS ATT
VOL PRIO P SKIP
MR
LOW 1 5 9
) to select memory mode.
), rotate
•
TS LOCK
) for 1 sec. to enter select
• .
S MW
) for more than 2 sec. otherwise the
for 1 sec.
S.MW
- DUP
WFMAM T SQL DTCS ATT
VOL PRIO P SKIP
MR
LOW 1 5 9
MEMORY/CALL CHANNELS
eWhile pushing and holding [CALL] (
[DIAL] to select "BANK."
• Pushing [CALL] (
•
MODE SCAN
lectable.
rWhile pushing and holding [BAND] (
[DIAL] to select the desired bank to receive the transferred
information or erase the bank contents.
• Select "-- -- -- --" indication when erasing the contents from the
bank.
When transferring
WFMAM - DUP T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW 1 5 9
t Rotate [DIAL] to select the desired bank channel.
yWhile pushing and holding [CALL] (
[DIAL] to select "S.MW."
• Pushing [CALL] (
•
MODE SCAN
lectable.
u Push and hold [V/M] (
SKIP
• 3 beeps sound.
Push Push and hold
• ), rotate
MODE SCAN
) several times, "BANK" is also se-
), rotate
•
TS LOCK
When erasing
WFMAM - DUP T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW
1 5 9
• ), rotate
MODE SCAN
) several times, "S.MW" is also se-
• . ) for 1 sec.
S MW
Dual operation
6
6
32