Memory Bank Selection - Icom IC-E7 Instruction Manual

■ Memory bank selection

qPush [V/M] (
• . ) to select memory mode, if desired.
SKIP S MW
wWhile pushing and holding [BAND] (
[DIAL] to select the desired bank
.
and Y)
• The bank can also be selected by pushing [BAND] (
several times.
• The only programmed banks are displayed.
SCAN
S.MW
SET
Push Push and hold
), rotate
•
TS LOCK
(A to H, J, L, N, O to R, T, U
• )
TS LOCK
[DIAL]
Dual operation
MEMORY/CALL CHANNELS
WFMAM - DUP T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW
1 5 9
Rotate [DIAL] while
pushing [BAND]
WFMAM - DUP
T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW 1 5 9
Auto write channels
eRotate [DIAL] to select the bank channel.
• Only programmed channels are displayed.
- DUP
WFMAM T SQL
VOL PRIO P SKIP
LOW 1 5
Bank initial
Bank channel number
rTo return to regular memory operation, rotate [DIAL] while
pushing and holding [BAND] (
) several times.
( •
TS LOCK
6
- DUP DTCS ATT
WFMAM T SQL
VOL PRIO P SKIP MR
LOW
1 5 9
Only programmed
banks appear
WFMAM - DUP
T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW 1 5 9
DTCS ATT
MR
9
• ), or push [BAND]
TS LOCK
6
26