Icom IC-E7 Instruction Manual page 9

4. Tune the desired frequency
The tuning dial will allow you to dial in the frequency you want
to use. Pages 11 and 17 will instruct you on how to set the
tuning step size.
qPush [BAND] (
) sev-
•
TS LOCK
eral times to select the de-
sired frequency band.
• While pushing and holding
rotating
[BAND] ( • ),
TS LOCK
[DIAL] also selects frequency
band.
wRotate [DIAL] to set the de-
sired frequency.
• While pushing and holding
[FUNC], rotate [DIAL] to select
frequency in 1 MHz steps.
[DIAL]
[BAND]
[FUNC]
QUICK REFERENCE GUIDE
5. Operating mode selection
➥ While pushing and holding
push
[FUNC], [CALL]
( • ) several times to
MODE SCAN
select the desired operating
mode.
• FM, WFM and AM modes are
selectable.
• WFM mode is not selectable
below 30 MHz band.
6. Transmit and receive
➥ Push and hold [PTT] to trans-
mit then speak into the micro-
phone; release to receive.
• Transmission is available on the
144 MHz/430 MHz (FM mode)
amateur bands only.
[FUNC]
[CALL]
[PTT]
Microphone
IV