Offset Frequency - Icom IC-E7 Instruction Manual

■ Offset frequency

When communicating through a repeater, the transmit fre-
quency is shifted from the receive frequency by the amount of
the offset frequency.
qWhile pushing and holding [FUNC], push and hold
[SQL] ( • ) for 1 sec. to enter set mode.
ATT SET
SCAN
S.MW
SET
SET
Push Push and hold
wRotate [DIAL] to select "OFFSET."
eWhile pushing and holding [FUNC], rotate [DIAL] to set the
[DIAL]
r Push [SQL] (
Dual operation
REPEATER OPERATION
WFMAM - DUP
T SQL DTCS ATT
After 1 sec.
VOL PRIO P SKIP
MR
LOW 1 5 9
Offset frequency item
desired offset frequency within 0.000–159.995 MHz range.
• The tuning step, selected in VFO mode, is used for setting.
) to exit set mode.
•
ATT SET
5
WFMAM - DUP
T SQL DTCS ATT
VOL PRIO P SKIP
MR
LOW 1 5 9
Setting indication
5
20