Memory Clearing - Icom IC-E7 Instruction Manual

■ Memory clearing

Contents of programmed memories can be cleared (blanked),
if desired.
qPush and hold [V/M] (
SKIP
memory write mode.
• 1 short and 1 long beeps sound.
• " " indicator and memory channel number blink.
• Do not hold [V/M] (
• .
SKIP S MW
memory contents will be copied to VFO.
wRotate [DIAL] to select the desired memory channel to be
cleared.
eWhile pushing and holding [CALL] (
[DIAL] to select "CLEAR."
• "CLEAR" item can also be selected by pushing [CALL]
) several times.
( •
MODE SCAN
SCAN
SCAN
S.MW
S.MW
SET
) for 1 sec. to enter select
• .
S MW
) for more than 2 sec. otherwise the
• ), rotate
MODE SCAN
[DIAL]
WFMAM - DUP
T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW 1 5 9
After [CALL]
released
WFMAM - DUP
T SQL DTCS ATT
VOL PRIO P SKIP
MR
LOW 1 5 9
MEMORY/CALL CHANNELS
rPush and hold [V/M] (
SKIP
contents.
• 3 beeps sound.
• Return to VFO or memory mode, if VFO is selected before per-
forming step q.
• Return to select memory write mode if memory mode is selected
before performing step q.— "
nel number blink. Push [V/M] (
to memory mode.
Push
S.MW
WFMAM - DUP T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW
1 5 9
While pushing and holding [FUNC], push and hold
) for 1 sec. after step w also clears the
[V/M] ( • .
SKIP S MW
memory contents. In this case, steps e and r are not
necessary.
☞NOTE: Be careful!— the contents of cleared memories
CANNOT be re-called even in bank channel opera-
tion.
Push Push and hold
6
• . ) for 1 sec. to clear the
S MW
" indicator and memory chan-
) momentarily to return
• .
SKIP S MW
for 1 sec.
WFMAM - DUP
T SQL DTCS ATT
VOL PRIO P SKIP
MR
LOW 1 5 9
Dual operation
6
30