Auto Memory Write Scan - Icom IC-E7 Instruction Manual

■ Auto memory write scan

This scan is useful for searching a specified frequency range
and automatically storing busy frequencies into memory
channels. The same frequency ranges used for program scan
are used for auto memory write scan.
q Select VFO mode with [V/M] (
wPush and hold [CALL] (
MODE
scan type selection condition.
e Rotate [DIAL] to select the desired scanning type.
• "ALL" for full scan; "BAND" for band scan, "PROGxx" for pro-
grammed scan (xx= 0 to 24; programmed scan edges numbers
only displayed)
r Push [CALL] (
•
MODE SCAN
tPush [V/M] (
) to toggle the automatic memory
• .
SKIP S MW
write function ON and OFF.
• " " indicator blinks during auto memory write.
SCAN
SCAN
S.MW
SET
yPush [CALL] (
•
MODE SCAN
• . ), if necessary.
SKIP S MW
) for 1 sec. to enter
•
SCAN
) to start the scan.
[DIAL]
WFMAM - DUP
T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW 1 5 9
" " indicator blinks
) to stop scan.
D D During auto-memory write scanning:
• When a signal is received, scan pauses and the frequency
is stored into auto memory write channel group (000
- 2 short beeps sound when stored.
• Scan resumes after frequency storing.
• When all channels are stored, the scan cancels automati-
cally and 1 long beep sounds.
D D Re-calling the stored frequencies:
qPush [V/M] (
) to select memory mode.
• .
SKIP S MW
wPush [BAND] (
) several times, or while pushing
•
TS LOCK
and holding [BAND] (
•
TS LOCK
auto memory write channel group.
• "♦" appears.
WFMAM - DUP
T SQL DTCS ATT
Appears
VOL PRIO P SKIP MR
LOW 1 5 9
e Rotate [DIAL] to select the desired channel.
D D Clearing the stored frequencies:
q Select the auto memory write channel group.
wWhile pushing and holding [FUNC], push and hold
) for 1 sec. to clear the all channels con-
[V/M] ( • .
SKIP S MW
tents.
• 1 short and 1 long beeps sound.
NOTE: The auto memory write channel contents CANNOT
be cleared as an independent channel. Thus it is a good
idea to copy the contents into a memory channel.
SCAN OPERATION
♦
–199
), rotate [DIAL] to select the
7
♦
).
7
38