D Memory Keyer Send Menu - Icom IC-7000 Instruction Manual

Menu group selection
Hold down [MENU/GRP] for 1 second.
Selection from: M, S or G(Graphic)
Menu selection (Example: S)
Push [MENU/GRP] momentarily.
Selection from: S-1, S-2 or S-3

D Memory keyer send menu

Pre-set messages can be sent using the memory
keyer send menu. Contents of the memory keyer are
set using the edit menu.
[MODE]
[F-1]
[MENU/GRP] [F-2] [F-3] [F-4]
• Memory keyer send menu
Either Either
Y Y or Z Z
or
• Transmitting
q Select CW mode with [MODE].
w Set the break-in function ON (p. 85).
• When step t is performed with the break-in function
OFF, the memory keyer contents are monitored.
e Select S-1.
r Push [F-2 KEY] to enter the keyer send menu.
• If the keyer root menu appears, push [F-1 SND].
The keyer starting menu can be changed in the
miscellaneous (others) Set mode (p. 134).
t Push [F-1 M1] — [F-4 M4] momentarily to transmit
the contents one time; hold down these keys for 1
second to transmit the contents repeatedly.
• "M1"– "M4" are highlighted while transmitting.
• "(" and ")" appear while transmitting repeatedly.
• While transmitting repeatedly, push any function key to
cancel the transmission.
• Set the repeat interval of the memory keyer to 1–60
seconds (1 second steps). See page 49 for keyer Set
mode.
• To decrement the contact number, push [Y(
grp
y Push [Z(
Contact number
Memory keyer keyer send menu and return to normal CW mode
content
indication.
RECEIVE AND TRANSMIT
)].
)] twice to exit the memory
menu/grp
4
4
menu /
46