D Transferring In Memory Mode - Icom IC-7000 Instruction Manual

D Transferring in memory mode

This is useful for transferr ing frequency and
operating mode while operating in memory mode.
When you have changed the frequency or
operating mode in the selected memory channel.
• Displayed frequency and mode are transferred.
• Programmed frequency and mode in the
memory channel are not transferred, and they
remain in the memory channel.
q Push [PBT/M-ch/RIT] momentarily to select the
M-ch/RIT function, if the twin PBT is selected.
• [PBT/M-ch/RIT] indicator (Green) goes out.
w Select M-2.
e Push [F-4 V/M] momentarily to select the
memory mode.
r Rotate [M-ch] to select the memory channel to be
transferred.
• " " appears if the selected memory channel is a
blank channel (and does not have contents). In this
case transferring is not possible.
t Hold down [F-4 V/M] for 1 second to transfer the
frequency and operating mode.
• Displayed frequency and operating mode are
transferred to the VFO.
y Push [F-4 V/M] momentarily to select the VFO
mode.
MEMORY OPERATION
[PBT/M-ch/RIT] switch/[M-ch] (inner) control
[PBT/M-ch/RIT] indicator
[MENU/GRP] [F-4]
8
8
108