Options - Icom IC-7000 Instruction Manual

MB-120
MOUNTING BASE
Allows you to conveniently vehicle-mount the
front panel of the IC-7000. An MB-105 must
be used in combination with the MB-120.
OPC-598
ACC 13-PIN CABLE
Required when using the AT-180 .
• 7 m (22 ft)
OPC-1443
SEPARATION CABLE
OPC-1444
SEPARATION CABLE
(OPC-1443)
Provide front panel detached operation for mobile installations or compact transceiver
operation.
• OPC-1443: 3.5 m (11.5 ft)
• OPC-1444: 5 m (16.4 ft)
IC-PW1/EURO HF/50 MHz ALL BAND 1 kW LINEAR AMPLIFIER
Full-duty 1 kW linear amplifier including an automatic antenna tuner. Has automatic tuning
and band selection capability. Full break-in (QSK) operation is possible. The amplifier/power
supply unit and the remote control unit are separated. An optional OPC-599 is required for
connection.
MB-106
CARRYING HANDLE
Convenient when carrying the transceiver.
OPC-599
ADAPTOR CABLE
13-pin, ACC connector to 7-pin + 8-pin
ACC connector.
(OPC-1444)

OPTIONS

OPC-589
MICROPHONE ADAPTOR CABLE
Conversion between 8-pin modular and
8-pin metal connector for using a desktop
microphone with the IC-7000.
OPC-742 ACC 13-PIN CABLE
Required when using both the AT-180
and 2 m linear amplifier.
Approved Icom optional equipment
is designed for optimal performance
when used with an Icom transceiver.
Icom is not responsible for the destruc-
tion or damage to an Icom transceiver
in the event the Icom transceiver is
used with equipment that is not manu-
factured or approved by Icom.
19
19
150