D Memory Keyer Send Menu - Icom IC-7000 Instruction Manual

Hold down [MENU/GRP] for 1 second.
Selection from: M, S or G(Graphic)
Push [MENU/GRP] momentarily.
Selection from: S-1, S-2 or S-3
D
Pre-set messages can be sent using the memory
keyer send menu. Contents of the memory keyer are
set using the edit menu.
[MODE]
[F-1]
[MENU/GRP] [F-2] [F-3] [F-4]
Either Either
Y Y or Z Z
or
u
Contact number
Memory keyer
content
RECEIVE AND TRANSMIT
q Select CW mode with [MODE].
w Set the break-in function ON (p. 85).
t is performed with the break-in function
OFF, the memory keyer contents are monitored.
e Select S-1.
r Push [F-2 KEY] to enter the keyer send menu.
The keyer starting menu can be changed in the
miscellaneous (others) Set mode (p. 134).
t Push [F-1 M1] — [F-4 M4] momentarily to transmit
the contents one time; hold down these keys for 1
second to transmit the contents repeatedly.
M1"– "M4" are highlighted while transmitting.
(" and ")" appear while transmitting repeatedly.
cancel the transmission.
seconds (1 second steps). See page 49 for keyer Set
mode.
GRP
)].
y Push [Z(
MENU/GRP
)] twice to exit the memory
keyer send menu and return to normal CW mode
indication.
4
4
[F-1 SND].
MENU /
[Y(
46