Clock And Timers; Time Set Mode; Year; Date - Icom IC-7000 Instruction Manual

12

CLOCK AND TIMERS

■ Time Set mode

This transceiver has a built-in 24-hour clock (accuracy
±75 seconds per month) with power-off timer function.
The clock indication is always displayed except after
pushing [F-INP/ENT] (HM-151).
• Set mode operation
[AF]
[F-1]
[MENU/GRP]

1 Year

This item sets the current year.

2 Date

This item sets the current date.
3 Time (Now)
This item sets the current time for the built-in 24-hour
clock.

4 CLOCK2 Function

This item turns the second clock indication ON or
OFF instead of 1st clock.
The clock 2 is convenient to indicate the UTC and
other country's local time, etc.
• Hold down [F-4 DEF] for 1 second to set the default
value.

5 CLOCK2 Offset

This item sets the desired off-set time period for the
clock 2 indication within –24:00 to +24:00 in 5 min.
steps.
• Hold down [F-4 DEF] for 1 second to set the default
value.

6 Auto Power OFF

This item sets the power-off period for automatic
shutdown after the power-on timer has turned power
ON.
117
[F-2] [F-3] [F-4] [DIAL]
q Push [AF( )] momentarily to enter the Set mode
set
menu.
w Push [F-3 TIME] to enter the time Set mode.
e Push [F-1 ≤] or [F-2 ≥] to select the desired item.
r Rotate [DIAL] to set or select the desired value or
condition.
• Hold down [F-4 DEF] for 1 second to select a default
value or condition.
t Push [Z( )] twice to exit the Set mode.
menu/grp
2005
Rotate [DIAL], then push [F-3 SET] to set the year.
3-15(Tue)
Rotate [DIAL], then push [F-3 SET] to set the date.
15:00
Rotate [DIAL], then push [F-3 SET] to set the time.
ON
The clock 2 is displayed
instead of the 1st clock indi-
cation.
± 0:00
(default)
60min
Push [F-3 SET] to enter the time.
OFF
The clock 2 does not dis-
play. (default)
+ 9:00
Rotate [DIAL] to set the
time.