Ur 5Nn✽ Bk; M3 Cfm Tu; M4 Qrz; D Editing A Keyer Memory - Icom IC-7000 Instruction Manual

4
RECEIVE AND TRANSMIT

D Editing a keyer memory

The contents of the memory keyer memories can
be set using the memory keyer edit menu. The
memory keyer can memorize and re-transmit 4 CW
sequences for often-used CW messages, contest
number, etc. Total capacity of the memory keyer is
55 characters per memory channel.
[F-1]
[MENU/GRP]
Memory channel select
Selected
character
• Pre-programmed contents
CH
M1
CQ TEST CQ TEST DE ICOM ICOM TEST
M2 UR 5NN✽ BK
M3 CFM TU
M4
QRZ?
47
[F-2] [F-3] [F-4]
Contents
• Programming contents
q Push [MODE] to select CW mode.
w Select S-1.
• Hold down [MENU/GRP] for 1 second once or twice
to select the menu group S.
• Push [MENU/GRP] momentarily one or more times
to select the menu S-1.
e Push [F-2 KEY] then [Z(
keyer root menu.
• If the keyer root menu appears, skip pushing
[Z( )]. The keyer starting menu can be
menu / grp
changed in the miscellaneous (others) Set mode. (p.
134)
r Push [F-2 EDT] to enter the keyer edit menu.
t Push [F-1 M1] - [F-4 M4] to select the desired
keyer memory channel.
y Push [Y( )] several times to select the
menu/grp
desired character group ([ABC], [123] or [etc]).
Key selection
ABC
123
etc
NOTE:
" " is used to transmit a following word with no
^
space such as . Put "
ar
such as ^AR, and the CW prosign "
with no space.
" " is used to insert the CW contest number.
✱
The contest number automatically increments
by 1. This function is only available for one
memory keyer channel at a time. Memory
keyer channel M2 uses "
u Select the desired character by rotating [DIAL]
or by pushing the band key (HM-151) for the
ABC
incrementing trigger memory number input.
C Q T E S T C Q T E S T D E I C O M I C O M
M 1
T E S T
• Push [F-1 Å] or [F-2 Ç] for cursor movement. U R 5 N N
Character M 2
ABC
C F M T U
group • Push [F-3 DEL] to delete the selected character.
M 3
keys 123 Q R Z ?
• Push [F-4 SPC] to input a space.
M 4
• "✱" is for contact numbers and can only be used on
ç
å
the memory channel used to increment the contact
number (" " appears next to that channel).
i Repeat steps y and u until the desired contents
are input.
o Push [Z( )] to return to memory channel
menu/grp
selection mode, then select the next memory
channel and repeat steps y and i for character
input, if desired.
!0 Push [Z( )] twice to exit the keyer edit
menu/grp
mode.
)] to select the
menu/grp
Editable characters
A to Z (capital leters)
0 to 9 (numbers)
/ ? ^ . , @ ✽
" before a text string
^
" is sent
AR
" by default.
✱
KEYER EDIT
0 0 1 B K
DEL SPACE M1..M4
Memory ch
select