Memory Channel List; Using The Memory Channel List - Icom IC-7000 Instruction Manual

8
MEMORY OPERATION

■ Memory channel list

The memory channel list simultaneously shows 7
memory channels and their programmed contents.
You can select a desired memory channel from the
memory channel list.
D Selecting a memory channel using the memory channel list
[PBT/M-ch/RIT] switch/[M-ch] (inner) control
[PBT/M-ch/RIT] indicator
[MENU/GRP] [F-1]
q Select M-2.
w Push [F-4 V/M] to select memory mode.
e Push [F-1] (MEM, LST) twice to enter the
memory channel list.
r Push [PBT/M-ch/RIT] momentarily to select the
M-ch/RIT function, if the twin PBT is selected.
• [PBT/M-ch/RIT] indicator (Green) goes out.
t Rotate [M-ch] (inner) control to select the desired
memory channel.
• All memory channels including blank channels can be
selected.
• [Y]/[Z] on the microphone also changes the channels.
y To e x i t t h e m e m o r y c h a n n e l l i s t , p u s h
[Z( )] twice.
menu/grp
103
[F-4]
Menu group selection
Hold down [MENU/GRP] for 1 second.
Selection from: M, S or G(Graphic)
Menu selection (Example: M)
Push [MENU/GRP] momentarily.
Selection from: M-1, M-2 or M-3
Either Either
Y or Z Y Z
or
MEM
Push
LST
Push
Rotate