Meter Function; D Multi-Function Meter - Icom IC-7000 Instruction Manual

■ Meter function

The transceiver has 4 transmit meter functions for
your convenience. Select the desired meter with the
[F-3 MET] in the S-1 display.
[MENU/GRP] [F-3]
q Select S-1.
• Hold down [MENU/GRP] for 1 second once or twice
to select the menu group S.
• Push [MENU/GRP] momentarily one or more times
to select the menu S-1.
w Push [F-3 MET] one or more times to select from
RF power , SWR, ALC or compression level
(Po)
.
(COM)
• The display indication changes as the table at the right.

D Multi-function meter

In addition, the transceiver can display the multi-
function meter in the graphic display, which displays
all transmit meters simultaneously.
[MENU/GRP]
➥ Select G-2 (Multi-meter).
• Hold down [MENU/GRP] for 1 second once or twice
to select the menu group G.
• Push [MENU/GRP] momentarily one or more times
to select the menu G-2 (Multi-meter).
BASIC OPERATION
DISPLAY
MEASUREMENT
INDICATION
Po
Indicates the relative RF output power in %.
Indicates the SWR on the transmission
SWR
line.
Indicates the ALC level. When the meter
movement shows the input signal level
exceeds the allowable level, the ALC limits
ALC
the RF power. In such cases, reduce the
MIC gain setting (see p. 38) in the quick
Set mode.
Indicates the compression level when the
COM
speech compressor is in use.
NOTE: The SWR meter cannot be used for
144/430 MHz bands since the meter measures
only the [ANT1] connector.
The multi-function meter also displays the internal
temperature meter.
Quick entry
➥ Hold down [Z( )] for 1 second to turn the
band
multi-function meter ON or OFF.
• Push [Z( )] also to turn OFF.
menu / grp
3
3
[Z]
36