Push [F-1 M1] - [F-4 M4] To Select The Desired; D Keyer Set Mode; Keyer Repeat Time; Dot/Dash Ratio - Icom IC-7000 Instruction Manual

4
RECEIVE AND TRANSMIT

D Keyer Set mode

This Set mode is used to set the memory keyer
repeat time, dash weight, paddle specifications,
keyer type, etc.
[MODE]
[F-1]
[MENU/GRP]

1 Keyer Repeat Time

When sending CW using the repeat timer, this item
sets the time between transmission.

2 Dot/Dash Ratio

This item sets the dot/dash ratio.
Keying weight example: Morse code "K"
Weight setting: DASH
1:1:3 (default)
Weight setting:
Adjusted
Adjustable range
*SPACE and DOT length can be adjusted with
"Key Speed" only in the quick Set mode.
49
[F-2] [F-3] [F-4]
DOT (Fixed*)
DASH
SPACE (Fixed*)
• Setting the electronic keyer
q Select CW mode with [MODE].
w Select S-1.
• Hold down [MENU/GRP] for 1 second once or twice
to select the menu group S.
• Push [MENU/GRP] momentarily one or more times
to select the menu S-1.
e Push [F-2 KEY] then [Z(
keyer root menu.
• If the keyer root menu appears, skip pushing [Z(
)]. The keyer starting menu can be changed in the
grp
miscellaneous (others) Set mode. (see p.134)
r Push [F-4 SET] to enter the keyer set menu.
t Push [F-1 ≤] or [F-2 ≥] to select the desired set
item.
• Hold down [F-4 DEF] for 1 second to select the
default condition or value.
y Push [Z( )] twice to exit the keyer set
menu/grp
menu and return to normal CW mode indication.
• 1 to 60 seconds in 1 second steps can be selected.
• Hold down [F-4 DEF] for 1 second to select a
default setting. (default: 2 seconds)
• 1 : 1 : 2.8 to 1 : 1 : 4.5 can be set.
• Check the ratio with side tone in CW mode.
• Hold down [F-4 DEF] for 1 second to select a
default ratio of 1 : 1 : 3.0.
)] to select the
menu/grp
menu /