Ricoh Aficio MP 3500 Operating Instructions Manual page 82

System Settings
To set search options
This section describes how to specify search options.
To search the LDAP server data using a keyword other than prepared keywords
such as Name, E-mail Address, FAX Number, Company Name, and Department
Name, specify the attribute for the keyword registered in your LDAP server, and
the name to be displayed on the control panel during the search. For example, to
2
search e-mail addresses by employee number, enter "employeeNo." in the At-
tribute field, and "Employee No." in the key display field.
A
Press [TNext] three times.
B
Press [Change] under "Attribute".
C
Enter the attribute you want to use when searching for e-mail addresses,
and then press [OK].
The attribute value may change depending on the server environment. Check
the attribute complies with your server environment before setting it.
D
Press [Change] under "Key Display".
E
Enter the key display, and then press [OK].
The registered "key display" appears as a keyword for searching LDAP.
• Without key display registration
• With key display registration
The key does not appear on the search screen unless both "Attribute" and
"Key Display" are registered. Make sure you register both to use the optional
search.
74