Ricoh Aficio MP 3500 Operating Instructions Manual page 53

❖ Paper Type: Bypass Tray
Sets the display so you can see what type of paper is loaded in the bypass tray.
• The paper types you can set for the bypass tray are as follows:
recycled paper, special paper, colour paper, letterhead, label paper, pre-
punched paper, bond paper, cardstock, thick paper, OHP
The default setting is No Display.
❖ Paper Type: Tray 1-4
Sets the display so you can see what type of paper is loaded in each paper
tray. The print function uses this information to automatically select the pa-
per tray.
• The paper types you can set are as follows:
recycled paper, special paper, colour paper, letterhead, preprinted paper,
prepunched paper, bond paper, cardstock
The default setting for "Paper Type" is No Display.
The default setting for "Copying Method in Duplex" is 2 Sided Copy.
The default setting for "Apply Auto Paper Select" is Yes.
When paper of the same type and size is loaded in two different paper trays
and you want to specify tray for 2 Sided Copy and tray for 1 Sided Copy,
specify the upper tray for 2 Sided Copy. If one of the trays is specified as the
default in Paper Tray Priority, assign 2 Sided Copy to that tray.
A mark appears next to the paper tray if [No] is selected in "Apply Auto Pa-
per Select".
[Auto Paper Select] can only be selected for the copier function if [No Display]
and [Recycled Paper] are selected. If [No] is selected, Auto Paper Select is not
valid for the tray.
❖ Paper Type: LCT
Sets the display so you can see what type of paper is loaded in the LCT.
The paper types you can set are as follows:
• recycled paper, special paper, colour paper, letterhead, preprinted paper,
prepunched paper, bond paper, cardstock
The default setting for "Paper Type" is No Display.
The default setting for "Copying Method in Duplex" is 2 Sided Copy.
The default setting for "Apply Auto Paper Select" is Yes.
A mark appears next to the LCT if [No] is selected in "Apply Auto Paper Se-
lect".
[Auto Paper Select] can only be selected for the copier function if [No Display]
and [Recycled Paper] are selected. If [No] is selected, Auto Paper Select is not
valid for the tray.
Tray Paper Settings
45
2