Registering Addresses and Users for Facsimile/Scanner Functions
Programming the SUB Code
This section describes how to program the SUB Code.
A
Press [Adv. Features], and then press [SUB Code].
B
Press [Change] under "TX SUB Code".
C
Enter the SUB Code, and then press [OK].
D
To enter the password, press [Change] under "Password (SID)".
E
Enter the password, and then press [OK].
F
Press [OK].
Programming the SEP Code
This section describes how to program the SEP Code.
A
Press [Adv. Features], and then press [SEP Code].
B
Press [Change] under "RX SEP Code".
C
Enter the SEP Code, and then press [OK].
D
7
To enter the password, press [Change] under "Password (PWD)".
E
Enter the password, and then press [OK].
F
Press [OK].
Setting the International TX Mode
This section describes how to set the International TX Mode.
A
Press [Change] under "International TX Mode".
B
Select [Off] or [On], and then press [OK].
Selecting the Fax Header
This section describes how to select the fax header.
You can register the fax header in Program Fax Information in the system set-
tings for Facsimile Features.
A
Press [Change] under "Fax Header".
B
Select [1st Name] or [2nd Name], and then press [OK].
Reference
p.116 "Registering Fax Information"
208