Ricoh Aficio MP 3500 Operating Instructions Manual page 121

❖ Program Memory Lock ID
Program a Memory Lock ID to be entered before printing documents when
the Memory Lock function is activated.
A Memory Lock ID can be any four-digit number, except 0000.
A Press [Facsimile Features].
B
Press [Administrator Tools].
C Press [TNext].
D Press [Program Memory Lock ID].
E
Enter an ID using the number keys, and then press [OK].
If you make a mistake, press [Clear] or the {Clear/Stop} key before pressing
[OK], and then try again.
Press the {User Tools/Counter} key.
F
❖ Select Dial / Push Phone
Use this function to select a line type when the machine is connected to a G3
analog line.
Dial and Push lines are available for selection.
The default setting is Push Button Phone.
If the optional extra G3 interface unit is installed, settings for the extra G3
lines appear.
This function is not available in some regions.
A Press [Facsimile Features].
B
Press [Administrator Tools].
C Press [TNext].
D Press [Select Dial / Push Phone].
E Press [Push Button Phone] or [Dial Phone (10PPS)] to select the line, and then
press [OK].
Press the {User Tools/Counter} key.
F
❖ Reception File Setting
Selects whether received documents are saved on the hard disk to be printed
later or printed immediately without being saved.
The default setting is Print.
For details about Reception File Setting, see "Storing or Printing Received
Documents".
Administrator Tools
113
4