Ricoh Aficio MP 3500 Operating Instructions Manual page 20

Connecting the Machine
❖ When using in ad hoc mode / 802.11 ad hoc mode
1
1. If it is connected properly to the network, the LED is green when in ad hoc
mode or 802.11 ad hoc mode. If the LED is blinking, the machine is searching
for devices. The LED will light after a few seconds.
2. If the IEEE 802.11b interface unit is functioning, the LED lights up in or-
ange.
Print the configuration page to verify settings.
Note
❒ For more information about printing a configuration page, see "Print List".
Reference
p.168 "Printing the Configuration Page"
Checking the Signal
This section describes how to check the machine's radio wave status.
When using in infrastructure mode, you can check the machine's radio wave sta-
tus using the control panel.
A
Press [System Settings].
B Press [Interface Settings].
C Press [IEEE 802.11b].
D
Press [Wireless LAN Signal].
The machine's radio wave status appears.
E After checking radio wave status, press [Exit].
Press the {User Tools/Counter} key to return to the User Tools / Counter / In-
F
quiry menu.
Reference
p.30 "Using Utilities to Make Network Settings"
p.53 "IEEE 802.11b"
12
ZGDH600J