Facsimile Features
Programming/Changing Special Senders
This section describes how to program and change Special Senders.
A
Press [Facsimile Features].
B
Press [Administrator Tools].
C
Press [TNext].
D
Press [Program Special Sender].
E
Check [Program / Change] is selected.
F
Select the destination to program or change.
4
When programming a new Special Sender, press [*Not Programmed].
G
Enter a destination name, and then press [OK].
Enter a destination name using Own Name or Own Fax Number.
H
Press [Full Agreement] or [Partial Agreement].
I
Select the item you want to program.
You must select only the item you want to program.
To cancel these settings, press [Cancel]. The display returns to that of step
J
Press [OK].
A Special Sender is programmed.
To program another sender, repeat the procedure from step
K
Press [Exit].
142
F
.
F
.