To set search conditions
This section describes how to specify search conditions.
You can enter an attribute as a typical search keyword. Using the entered at-
tribute, the function searches the LDAP server's Address Book.
A
Press [TNext] twice.
B
Press [Change] for items you want to use as search conditions from the fol-
lowing: "Name", "E-mail Address", "Fax Number", "Company Name", and
"Department Name".
C
Enter the attribute you want to use when searching for e-mail addresses,
and then press [OK].
The attribute value may change depending on the server environment. Check
the attribute value complies with your server environment before setting it.
You can leave items blank, but you cannot leave attributes blank when
searching for e-mail addresses from the LDAP server Address Book.
Administrator Tools
73
2